Lab Report On Photosynthesis

The effect of different colored lights on the rate of Photosynthesis Objective: To find out which color of light provides the best consequences for the production of oxygen/ the rate of photosynthesis
Background:
In photosynthesis, there are two main parts, including light dependent and light-independent reactions. Plants use the energy from light for producing sugar, which is being converted into ATP by cellular respiration. They also are the only organisms that produce oxygen along with glucose and fructose chains within the light-independent phases of photosynthesis. This process takes place in the chloroplasts of plants, which include chlorophyll.

Chlorophyll is essential for photosynthesis, since it absorbs the sun’s light. Green plants then use this light to combine CO and H₂O for making sugars and oxygen. After this process Oxygen is being released though pores called stomata. The overall reaction can be expressed as follows; 6H₂O + 6CO₂  C₆H₁₂O₆ + 6O₂1
There are four variables that affect the rate of photosynthesis; light intensity, temperature, CO₂ and water.2 However, is it possible to count in the colour of light, too, which I am going to investigate in this lab. Since the photosynthesis takes place in chloroplasts that has chlorophyll, the rate of photosynthesis can be affected by different colours of light, since the absorption of light changes within different colours. Research Question:
What colour of light is most effective on the rate of photosynthesis? Five different coloured transparencies (red, green, yellow, blue, purple) are being used for changing the light’s colour. Within 5 minutes for each one of them, they will be used in order to see oxygen bubbles rising from a used water plant. The produced oxygen (in the form of bubbles) indicates the rate of photosynthesis and is being measured by counting bubbles. The highest amount of oxygen bubbles being produced per minute is equivalent to the highest rate of photosynthesis, and the colour providing the best circumstances for the production of photosynthesis. Hypothesis:
Since Plants absorb green light, I expect the rate of photosynthesis to be the highest when red light is being used. This is due to the colour spectrum, where one can say that red is the opposite colour to green. Therefore, I expect red light to provide the most energy for the plant absorbing it.
Variables:
Variable
Type
Method
Light intensity
Controlled
At the most intense level possible (770 lux) and a distance of 50cm from the aquarium. Temperature of water
Controlled
At room temperature; adding colder water when temperature rises. pH level
Controlled
All solution has a pH of 7.
Plant type and colour
Controlled
Leaves of the same species; green
Coloured light
Independent
Changing colours with coloured slides (yellow, blue, red, green, purple) in front of the light source. The rate of photosynthesis
Dependent
Changed by the colour of light, collected with stop watch and counted by produced bubbles.
Material:
2000 cm³ of water (~300 for every colour + water for controlling variables) One flask/ glass cup
One test tube
One funnel
2-3 healthy water plants
One thermometer
Spotlight
Five coloured transparencies (blue, red, yellow, green, purple) Stopwatch
One lux meter
Procedure:
Before starting the experiment, the spotlight has to be placed at point on the table, 20 cm away from where the plant is to be set. Then the lux meter is to be taken for calculating the intensity of the spotlight onto the plant. Following this, the colour transparencies will be set in front of the light and the resulting light intensity will be noted by placing the lux meter on the place where the plant is to be set. For each run, under-water cut leaves from the water plant are put carefully in the funnel, which small open end is put into the test tube. This all is to be done in the flask filled with the water provided for each run and is to be placed at the distance of 20 cm from the spotlight. 3 The water temperature is to be measured and to be kept constant at all time (+/- 1°C).
The first colour transparency is then to be placed in front of the spotlight and the oxygen bubbles rising from the plant’s leaves are to be counted. After 1½ minute, the first run of the first colour is completed and following 4 runs have to be concluded the same way. In case the water temperature rises, cold water has to be added. The experiment then has to be repeated 4 more times with the different coloured transparencies in the same way. (A procedure repeating each run 5 times, would be the best for minimizing errors that could occur, due to the 5×5 rule.) The collected data is noted on paper and will be processed to determine the rate of photosynthesis at every colour.
Data collection and raw processing:
The experiment was carried out with the following order of colours: Run 1-5: Blue
Run 6-10: Green
Run 11-15: Yellow
Run 16-20: Red
Run 21-25: Purple
Raw Data
Qualitative Observations:
Run 1-5: A high number of bubbles rose up
Run 6-10: Almost no bubbles were being produced
Run 11-15: Only a few bubbles rose up
Run 16-20: A very large number of bubbles were being produced Run 21-25: Not too many bubbles were being produced by the plant * Until the first bubbles rose up, some time has had passed already; the observations are only being compared with the data processed by the plant being used in this experiment, not with those from others.
Quantitative Data:
Run
Number of Oxygen bubbles being produced with Blue light
Number of Oxygen bubbles being produced with Green light
Number of Oxygen bubbles being produced with Yellow light
Number of Oxygen bubbles being produced with Red light
Number of Oxygen bubbles being produced with Purple light
Run 1(after 90 sec.)4
2
0
0
3
2
Run 2 (after 180 sec.) 5
11
1
4
13
4
Run 3 (after 270 sec.)
12
2
4
15
6
Run 4 (after 360 sec.)
12
1
2
14
5
Run 5 (after 450 sec.)
13
1
3
15
5
For a better overview the diagram below represents the quantitative data provided.
Processed Data:
The collected data has to be processed. This will be done by calculating the mean values for all runs of each of the colours by using Excel. The results will be put in a table, as well as in a diagram for a better overview. Also, for finding out whether the collected data is reliable or not and how different the results are to the means, the standard deviation for all runs of the colours have to be calculated using the same method.
Bule
Green
Yellow
Red
Pruple
Mean
10
1
2.6
12
4.4
Stand. Dev.
0.82
0.5
0.96
0.96
0.82
Table providing the processed data
Diagram providing the processed data for a better overview
Conclusion
After all data has been collected and processed, one can say that the stated hypothesis from the beginning of the lab report, which says that red is the colour that provides the best circumstances for the production of oxygen, is being supported by the observations and calculations made. The qualitative observations showed clearly, that the plant produced most oxygen under red light. The calculations of the means demonstrated that even though blue and red light had similar effects on the plant, the red light was most effective. Further calculations of the standard deviation showed that the data is not highly spread, standing for valuable data that has been collected.
Therefore it is to be concluded that the colour providing best light for the production of oxygen and therefore for the rate of photosynthesis is red, followed by blue. Furthermore, the data collected in this experiment is supported by sources and expectations from the IB Biology curriculum (and others), which states conclusions about the colour spectrum and the effect on plants absorbing the different wavelengths of coloured lights. However, it is to be noted that the data being collected points out some significant differences, as well as similar numbers of oxygen being produced.
This is probably due to the small protection of the light coming from the other sides onto the plant, which was not shielded and completely darkened except for the light coming from the spotlight. It is therefore more likely that the data collected was being influenced by the outside light, since there is a significant difference in the number of bubbles from the first run, in which few further light was influencing the production of oxygen. For improving the results, one could prepare the experiment in a darkened room, using more volt for the coloured lights.
Another problem can be included with pointing onto the water, which, for better results und and a higher rate of photosynthesis, should be changed to soda water, or at least, should provide a warm temperature and not as cold as the water was within Run No. 1. Even though there were these minor problems and possible improvements to this experiment, it worked out quite well, since the results being portrayed fit to those that have been published before.

Calculate the price
Make an order in advance and get the best price
Pages (550 words)
$0.00
*Price with a welcome 15% discount applied.
Pro tip: If you want to save more money and pay the lowest price, you need to set a more extended deadline.
We know how difficult it is to be a student these days. That's why our prices are one of the most affordable on the market, and there are no hidden fees.

Instead, we offer bonuses, discounts, and free services to make your experience outstanding.
How it works
Receive a 100% original paper that will pass Turnitin from a top essay writing service
step 1
Upload your instructions
Fill out the order form and provide paper details. You can even attach screenshots or add additional instructions later. If something is not clear or missing, the writer will contact you for clarification.
Pro service tips
How to get the most out of your experience with MyhomeworkGeeks
One writer throughout the entire course
If you like the writer, you can hire them again. Just copy & paste their ID on the order form ("Preferred Writer's ID" field). This way, your vocabulary will be uniform, and the writer will be aware of your needs.
The same paper from different writers
You can order essay or any other work from two different writers to choose the best one or give another version to a friend. This can be done through the add-on "Same paper from another writer."
Copy of sources used by the writer
Our college essay writers work with ScienceDirect and other databases. They can send you articles or materials used in PDF or through screenshots. Just tick the "Copy of sources" field on the order form.
Testimonials
See why 20k+ students have chosen us as their sole writing assistance provider
Check out the latest reviews and opinions submitted by real customers worldwide and make an informed decision.
FIN571
excellent work
Customer 452773, March 1st, 2024
Business and administrative studies
Thank you for your hard work
Customer 452773, October 19th, 2023
business
Great job
Customer 452773, February 13th, 2023
Managerial Accounting & Legal Aspects of Business ACC/543
excellent work
Customer 452773, February 7th, 2024
Criminal Justice
This has been the greatest help while I am recovering from an illness. Thank your team so much.
Customer 452671, May 2nd, 2021
Philosophy
Thank you
Customer 452811, February 17th, 2024
Human Resources Management (HRM)
excellent, great job
Customer 452773, June 19th, 2023
Business and administrative studies
Thank you for your hard work and effort. Made a 96 out of 125 points Lacked information from the rubic
Customer 452773, October 27th, 2023
Nursing
thank you so much
Customer 452749, June 10th, 2021
Criminal Justice
The paper was not accused of plagiarism and was written very well. I will let you know the grade once it is graded. Thank you
Customer 452671, April 26th, 2021
Business and administrative studies
Excellent job
Customer 452773, March 9th, 2023
Human Resources Management (HRM)
excellent job
Customer 452773, July 17th, 2023
11,595
Customer reviews in total
96%
Current satisfaction rate
3 pages
Average paper length
37%
Customers referred by a friend
OUR GIFT TO YOU
15% OFF your first order
Use a coupon FIRST15 and enjoy expert help with any task at the most affordable price.
Claim my 15% OFF Order in Chat
Close

Sometimes it is hard to do all the work on your own

Let us help you get a good grade on your paper. Get professional help and free up your time for more important courses. Let us handle your;

  • Dissertations and Thesis
  • Essays
  • All Assignments

  • Research papers
  • Terms Papers
  • Online Classes
Live ChatWhatsApp