This is an assignment that discusses why general ventilation system are in automotive parts. The paper also requires describing a local exhaust ventilation.,Why general ventilation system are in automotive parts,Instructions, This assignment will consist of two parts.,Part I: Thus far at Acme Automotive Parts (AAP), you have determined that controls are required in the paint booths, at the hand-welding stations, and on the machining lines. You have also determined that you cannot substitute any alternate chemicals in these areas because of requirements from your clients. You decide to use general dilution ventilation for the machining lines and local exhaust ventilation systems for the paint booths and the hand-welding stations. Complete the following tasks.,For the general dilution ventilation used in the machining lines:, Firstly, discuss why you believe a general ventilation system is appropriate for this operation., Secondly, state where you would you place the fans associated with the ventilation system., Thirdly, explain how you would test the effectiveness of the ventilation system.,Why general ventilation system are in automotive parts,For the local exhaust ventilation systems:, Describe the ,local exhaust ventilations (LEVs), you would use for each area (paint booths and hand-welding stations)., Choose a hood type for each of the two LEVs., Calculate the flow rate that would be if you placed the LEV for the welding operation 24 in. from the weld and desired a capture velocity of 100 ft per minute (ft/min) given W=12 in. and L=24 in. for any of the three hood types., Â·Â Â Â Â Â Â Â Â Discuss any barriers you might face in implementing the use of the LEVs for these two operations.,Part II: You also determinE that engineering controls are needed for the hydraulic press area., Discuss some types of engineering controls that might be implemented for the hydraulic press area., Describe the information you might require prior to designing engineering controls for the hydraulic press area., Explain how you would evaluate the effectiveness of the engineering controls for this area.,Your assignment must be a minimum of two pages in length, not including title or reference pages. Your assignment must use at least two references. One must be from the CSU Online Library, and the other may be your textbook.,Attachments,Click Here To Download,
Delivering a high-quality product at a reasonable price is not enough anymore.
That’s why we have developed 5 beneficial guarantees that will make your experience with our service enjoyable, easy, and safe.
You have to be 100% sure of the quality of your product to give a money-back guarantee. This describes us perfectly. Make sure that this guarantee is totally transparent.Read more
Each paper is composed from scratch, according to your instructions. It is then checked by our plagiarism-detection software. There is no gap where plagiarism could squeeze in.Read more
Thanks to our free revisions, there is no way for you to be unsatisfied. We will work on your paper until you are completely happy with the result.Read more
Your email is safe, as we store it according to international data protection rules. Your bank details are secure, as we use only reliable payment systems.Read more
By sending us your money, you buy the service we provide. Check out our terms and conditions if you prefer business talks to be laid out in official language.Read more